| Search Results |
Total results: 10 |
| 1 |
General Discussion/News
/ Re: I WOULD LIKE TO THANK YOU GUYS |
on: Oct 9th, 2008, 12:30pm |
| Started by racerman41son | Post by crewman41 |
IT HAS BEEN A HONOR WORKING WITH YOU GUYS AND HOPE WE CAN KEEP IT GOING FOR THE YEARS TO COME AS LONG AS YOU GUYS ARE RACING. BEING PART OF YOUR GUYS TEAMS HAS HAD IT UPS AND DOWNS BUT THAT IS RACING . I JUST HOPE THAT WE CAN KEEP ON GETTING BETTER AND GET WINS AND GOOD FINISH'S . SO YOU TAKE CARE HOPE TO HEAR FORM YOU .
|
  
|
| 2 |
General Discussion/News
/ Re: I WOULD LIKE TO THANK YOU GUYS |
on: Oct 3rd, 2008, 2:32pm |
| Started by racerman41son | Post by crewman41 |
OH I CHANGE MY NAME TO CREWMAN41. THIS IS ANTHONY BENETLEY. IF YOU GUYS NEED ANY HELP OR ANYTHING TO HELP OUT AT THE SHOP LET ME KNOW I WILL DO WHAT I CAN TO HELP OUT OK .
|
|
|
| 3 |
General Discussion/News
/ Re: I WOULD LIKE TO THANK YOU GUYS |
on: Oct 3rd, 2008, 2:29pm |
| Started by racerman41son | Post by crewman41 |
I would like to thank you guys for letting me be part of your team .It has met a lot in getting back into it and getting myself back to somewhat normal . i have to say it has been fun working with Mike ,Jason,Anthony,Monty,Nate,Albe,and Billy in the Pits . It has been fun hanging out with friends and there family's. I hope that you guys will keep me part of your guys team and we and do some good in the years to come . Hope that we can get some more wins and good top 5 finishes. Thanks againfor what you did at lebanon and medford . It has been really hard for me to do this for my father on doing the memorial laps. You guys are the greats friends to have . THE BENTLEY RACING TEAM (ANTHONY BENTLEY)
|
|
|
| 4 |
General Discussion/News
/ Re: I WOULD LIKE TO THANK YOU GUYS |
on: Jun 15th, 2008, 3:55pm |
| Started by racerman41son | Post by CMM |
Hey Anthony
We will be in touch on this. I am sure we can try and work something out. We still have the sides of the car. I will talk to Mike and see what we can do, we will call you.
Thanks
Jason
PS We will have the site up dated soon 
|
|
|
| 5 |
General Discussion/News
/ I WOULD LIKE TO THANK YOU GUYS |
on: Jun 13th, 2008, 01:15am |
| Started by racerman41son | Post by racerman41son |
MIKE THANK YOU FOR WHAT YOU DID FOR ME AT LEBANON IN MY FATHERS MEMORIAL LAP. IT MET THE WORLD TO ME TO GET TO DO THAT . I WAS WONDERING WHAT YOU WAS GOING TO DO WITH THE SIDE OF THE CAR . I WOULD LIKE TO SEE IF WE COULD DO ONE MORE THING IF WOULD BE OK . I WOULD LIKE TO SEE IF WE COULD AT THE END OF THE SEASON AT MEDFORD IF WE COULD TRY TO DO A MEMORIAL LAP DOWN THERE . CAUSE DAD LOVED TO GO DOWN THERE AND RACE IN THE BUD I-5 RACES. THAT WOULD BE THE ONLY OTHER THING I COULD THINK OF THAT HE WOULD LIKE TO DO IS TO DO SOMETHING FOR THE BUD I-5 RACES CAUSE HE DID GOOD AT TIMES IN THE I-5 . THAT IS THE ONLY THING ELSE I CAN THNK OF THAT I WOULD LIKE TO DO . WHAT DO YOU THINK OF THIS MIKE . I WOULD LIKE TO KNOW IF WE SHOULD DO THIS.
|
|
|
| 7 |
Classifieds
/ heads, hubs, oil pan, drysump tanks, & used tires |
on: Jan 26th, 2008, 3:25pm |
| Started by CMM | Post by CMM |
18 degree Trick Flow Heads CNC'd from the factory, GM Intake & Jesel Shaft Rockers 1.7 & 1.65. Heads are in good used condition. Like all aluminum heads they have been repaired in the past but are in great running condition. $1850
4- Winters Mag hubs w/ dust caps, drive hats & bearings
4-Drilled Rotors
4-Calipers
$750 for all
2 Drysump tanks $100 Each
Drysump SBC Aluminum Pan Used does have a dent and small leaks (We used lots of silicon) Works fine just needs to be fixed or sealed up really well. $100
Used D-55's Only $15 each
2004 Barry Wright Roller $9000 firm or $7000 firm without shocks & springs, radiator & all wheels non-beadlock
Can send pictures
Call or email
Mike Miller 541-510-9539
Jason Cadwell
jasoncadwell@prurep.com
|
|
|
| 8 |
Cadwell/Miller Motorsports News
/ Trak-Star Race Cars very impressive at 2008 WWS |
on: Jan 23rd, 2008, 11:24pm |
| Started by CMM | Post by CMM |
Trevor Glaser, the 3-Time Bud I-5 & Willamette Speedway Champion, debuted the first Trak-Star Race Car to run on the West Coast, at the 2008 Wild West Shootout. Trevor had a very impressive showing at this years 5 race swing in Casa Grande, AZ. While running against the "Big Dogs" from the Mid-West Trevor had a remarkable three Top 5 finishes, one Top 10 finish & one 20th place finish (however was running 4th when involved in a yellow). He was one of the few drivers to make every A-Main event as well. Trevor actually led most of race number 1 but was unable to hold on to the lead, due to the loss of power steering on lap 2 and had to settle for 3rd.
The moral to this story is.....the car worked very well
It was a team effort of Glaser, Cadwell/Miller Motorsports & Mike Boland of Boland Performance (Owner of Trak-Star race Cars), getting this deal put together. These cars have been running back east for a while now and have done very well there. But since the chassis' are new to the West Coast, and if we were going to try to sell these chassis around here, we figured we better put one of the best drivers on the West Coast in one.
The Cadwell/Miller Motorsports Team is proud to be the West Coast dealer for Trak-Star Race Cars. We believe these cars are going to be VERY popular in a short time. The racing season is starting soon you better get yours ordered right away.
*Cars are available in a square or round tube frames.
*We currently have 3 Cars at our Shop to look at and available to purchase.
Price Quotes can be given in many stages (All prices quoted do not include shipping):
*Bare Chassis (Includes Bumpers, Side Door bar & Battery Box)
*Chassis- Powder Coated, Interior Tin, Deck, & Brake Lines
*Roller Chassis-Many options available
Call or email us for info & pictures
Cadwell/Miller Motorsports
Mike Miller 541-510-9539
Jason Cadwell 541-619-4303
jasoncadwell@prurep.com
www.cadwellmillermotorsports.com
|
|
|
| 10 |
Classifieds
/ Re: Stuff for sale |
on: Jan 23rd, 2008, 5:01pm |
| Started by CMM | Post by CMM |
on Jan 20th, 2008, 9:44pm, Thiessen27 wrote:| Am I being gullible or are you serious? |
|
I am serious that the car can be bought for $7500 roller without shocks & springs, radiator & all wheels to be non-beadlocks. This is a great deal. Again only selling because we are now dealers for Trak-Star Race cars (The other chassis' we had at the swap meet)
OR $9500 with shocks springs etc as listed.
$11,500 with oil system, bert, bellhousing & starter
Call me for more info
Jason Cadwell
Cadwell/Miller Motorsports
541-619-4303
jasoncadwell@prurep.com
|
|
|
|
